• The BB team is looking for employees, who are ready to work with mephedrone, amphetamine, methamphetamine and other substances.
    High wage! Stable job.

    Requirements:

    • Make a minimum deposit of 50 EUR
    • Receive a batch of goods (from 25 g and more, depending on the deposit)
    • Pack the goods in bags (1-2g) and hide them in safe places in your city.

    We going to do the rest work! As soon as the goods are sold, you'll get money for each successfully sold package!

    Relevant for all EU countries and UK

    Contact : @Madre

Joined
Jul 25, 2021
Messages
193
Reaction score
269
Points
63
Introduction
Mephedrone (4-MMC) synthesis reaction is carried out with production of some amount by-products. Also, some amount of unredacted precursor is left in the reaction mixture after reaction. It takes to purify a 4-MMC product with insufficient purity to reduce health risks.

Manual

As soon as mephedrone hydrochloride is obtained, the mixture have to be turned into liquid state. It is hard to filter too thick mixture. The product can clogs Buchner funnel. A resulting product paste looks like clay, contains different impurities and has pungent chemical odor. A such product color is distinguished from usual. Also, it can solidify for a longer time. It is essential to remove as much as possible solvent from a product and it is better to reach a crumbly state, by gently stirring the 4-MMC product on the filter with a spatula. If the product is looks contaminated, a little dry ice cold acetone can be used for washing on the filter (the colder acetone, the better). It is important to dry the 4-MMC thoroughly so that it is crumbly and does not stick to lumps. Infrared lamp (infrared heater) can be used for drying in a dry warm room. The product have to be sifted to be sure that it is dry enough. You will obtain a powdery fraction.
2
3
UI43OdYZ6v
33
The 4-MMC powder quality is checked with a solution in water: 4-MMC 1 g is dissolved in water 3 ml 100 ºC. This procedure is carried out in a transparent beaker so that you can see a solution color. The solution should be clear and colorless. If insoluble particles or a dark color (darker than lemon) is presented, additional purification of the product is needed. The darker solution color, the more impurities 4-MMC contains.
IMG 20210719 135204
IMG 20210719 125956

Acetone washing:
Mephedrone powder is placed into Buchner filter and dry ice cold acetone is poured. Acetone is poured during vacuum pump working. You have to avoid excess amount of acetone on the filter by reason that part of 4-MMC can be dissolved. Product have to be filtered to a crumbly state and acetone have to be removed as much as possible. You can gently stir 4-MMC with a spatula to reach the best result. Acetone is added in small portions until clear solvent in receiver flask is obtained. Then, the product is dried well, sifted, and checking procedure is repeated.

*A high quality 99%+ acetone, which is distilled and dried before this procedure, is suitable for mephedrone powder purification. Sometimes a small amount of dichloromethane or ethyl acetate is washed before acetone.


Recrystallization in isopropanol

A glass or enameled container is placed on an electric stove (use an electric stove only, isopropanol (IPA) is easy flammable). IPA is poured and a gentle heating is turned on to 80 ºC. When a slight boiling (small bubbles) temperature is reached, mephedrone addiction is started in small portions with a stirring in order to dissolve all product. Do not let the mixture boil too much, the heater is turned off if it is necessary to avoid the product spoiling. As soon as product dissolving is stopped, a saturated mephedrone solution in IPA is obtained. The solution is cooled down to room temperature, 8 h in a fridge and 8 h in a freezer. As a result, a clear 4-MMC hydrochloride precipitate is obtained, a most by-products is remained in IPA. The precipitate is filtered with vacuum. Compare obtained 4-MMC mass with 4-MMC salt before recrystallization. If losses are too height (>50%), part of the product probably is still in IPA solution. In this case, ~50% IPA is evaporated, slowly cooled and filtered again.

Purification of the mephedrone solution in dichloromethane

Mephedrone is dissolved in ratio 1 g per 1 ml of water (+30 ºC), 0.5 volume of DCM is added and solution is stirred vigorously for few min. The solution is left for several min without stirring and two layers are formed. The upper aqueous layer is mephedrone solution, the bottom layer is DCM with by-products. Layers are separated, DCM layer is thrown out. The mephedrone aqueous solution can be evaporated to a pure powder or it can be used to crystals growing. The mephedrone solution washing can be done several times until the solution becomes colorless.

These methods can be used in combination. You will obtain a high-quality powder, It is recommended to make crystals http://bbzzzsvqcrqtki6umym6itiixfhn...threads/crystallization-of-mefedrone-4mmc.72/
 
Last edited by a moderator:

SonicNL

Don't buy from me
Resident
Joined
Feb 22, 2023
Messages
84
Reaction score
66
Points
18
When dissolved in water and dividing both layers and vaporizing both, a lot precipitated what was the DCM layer its an off white / yellow powdery crystal. The liquid was orange before.
Is the mephedrone partially dissolved in DCM? If so, the impurities will also stay right?
 
Joined
Jul 25, 2021
Messages
193
Reaction score
269
Points
63
When dissolved in water and dividing both layers and vaporizing both, a lot precipitated what was the DCM layer its an off white / yellow powdery crystal. The liquid was orange before.
Is the mephedrone partially dissolved in DCM? If so, the impurities will also stay right?
SonicNLYou probably did not extract the mephedrone salt well enough with water. That is why you had mephedrone in both phases. Write down in more detail what you did, if possible with a picture of the result.
 

SonicNL

Don't buy from me
Resident
Joined
Feb 22, 2023
Messages
84
Reaction score
66
Points
18
@Marvin "Popcorn" Sutton Followed this post, purification in DCM. Washed with acetone before applying the purification technique you described.

The precipitate in DCM is not easily soluble in (cold) water. I vaporated the water and there is nearly no precipitate. 15% of the total mass is in the water phase and the rest in the DCM phase.
 

Enalainirtselap

Don't buy from me
Member
Joined
Jun 16, 2023
Messages
2
Reaction score
2
Points
1
Thanks to this forum I successfully made my first batch of mephedrone. I dissolved the mephedrone in water for crystallization, but the water has a light brown color. According to your topic the mephedrone contains impurities and needs further washing. I have mephedrone dissolved in demiwater. The total solution is about 800 mL.

I bought DCM and washed the water about 4 times, but the color of the solution is not lemon like as you described, but more like coca-cola. I did not purify with acetone, because I used an HCL solution in water for acidification.

Have you got an advice on how to proceed? I crystallized about 20 mL of the solution, picture below.
4XcufODTzQ
 

BitcoinScam

Don't buy from me
New Member
Joined
Oct 29, 2023
Messages
58
Reaction score
30
Points
18
acetone help u only now
 

Enalainirtselap

Don't buy from me
Member
Joined
Jun 16, 2023
Messages
2
Reaction score
2
Points
1

MMX

Don't buy from me
Resident
Joined
Nov 28, 2023
Messages
32
Reaction score
6
Points
8
Deals
1
@marvin
sorry for bothering, i was inspired of chemistry long time ago its my time to start.
I just have one question okay. I followed your topic there and I d likew to ask if i do acetone pirifcation can I just do an IPA crystalization?
I meant a acethone prification from your topic below, is it required to follow these 3 steps in your actual post or just IPA crystalization.
Introduction
Mephedrone (4-MMC) synthesis reaction is carried out with production of some amount by-products. Also, some amount of unredacted precursor is left in the reaction mixture after reaction. It takes to purify a 4-MMC product with insufficient purity to reduce health risks.

Manual
As soon as mephedrone hydrochloride is obtained, the mixture have to be turned into liquid state. It is hard to filter too thick mixture. The product can clogs Buchner funnel. A resulting product paste looks like clay, contains different impurities and has pungent chemical odor. A such product color is distinguished from usual. Also, it can solidify for a longer time. It is essential to remove as much as possible solvent from a product and it is better to reach a crumbly state, by gently stirring the 4-MMC product on the filter with a spatula. If the product is looks contaminated, a little dry ice cold acetone can be used for washing on the filter (the colder acetone, the better). It is important to dry the 4-MMC thoroughly so that it is crumbly and does not stick to lumps. Infrared lamp (infrared heater) can be used for drying in a dry warm room. The product have to be sifted to be sure that it is dry enough. You will obtain a powdery fraction.
The 4-MMC powder quality is checked with a solution in water: 4-MMC 1 g is dissolved in water 3 ml 100 ºC. This procedure is carried out in a transparent beaker so that you can see a solution color. The solution should be clear and colorless. If insoluble particles or a dark color (darker than lemon) is presented, additional purification of the product is needed. The darker solution color, the more impurities 4-MMC contains.

Acetone washing:
Mephedrone powder is placed into Buchner filter and dry ice cold acetone is poured. Acetone is poured during vacuum pump working. You have to avoid excess amount of acetone on the filter by reason that part of 4-MMC can be dissolved. Product have to be filtered to a crumbly state and acetone have to be removed as much as possible. You can gently stir 4-MMC with a spatula to reach the best result. Acetone is added in small portions until clear solvent in receiver flask is obtained. Then, the product is dried well, sifted, and checking procedure is repeated.

*A high quality 99%+ acetone, which is distilled and dried before this procedure, is suitable for mephedrone powder purification. Sometimes a small amount of dichloromethane or ethyl acetate is washed before acetone.


Recrystallization in isopropanol
A glass or enameled container is placed on an electric stove (use an electric stove only, isopropanol (IPA) is easy flammable). IPA is poured and a gentle heating is turned on to 80 ºC. When a slight boiling (small bubbles) temperature is reached, mephedrone addiction is started in small portions with a stirring in order to dissolve all product. Do not let the mixture boil too much, the heater is turned off if it is necessary to avoid the product spoiling. As soon as product dissolving is stopped, a saturated mephedrone solution in IPA is obtained. The solution is cooled down to room temperature, 8 h in a fridge and 8 h in a freezer. As a result, a clear 4-MMC hydrochloride precipitate is obtained, a most by-products is remained in IPA. The precipitate is filtered with vacuum. Compare obtained 4-MMC mass with 4-MMC salt before recrystallization. If losses are too height (>50%), part of the product probably is still in IPA solution. In this case, ~50% IPA is evaporated, slowly cooled and filtered again.

Purification of the mephedrone solution in dichloromethane
Mephedrone is dissolved in ratio 1 g per 1 ml of water (+30 ºC), 0.5 volume of DCM is added and solution is stirred vigorously for few min. The solution is left for several min without stirring and two layers are formed. The upper aqueous layer is mephedrone solution, the bottom layer is DCM with by-products. Layers are separated, DCM layer is thrown out. The mephedrone aqueous solution can be evaporated to a pure powder or it can be used to crystals growing. The mephedrone solution washing can be done several times until the solution becomes colorless.

These methods can be used in combination. You will obtain a high-quality powder, It is recommended to make crystals http://bbzzzsvqcrqtki6umym6itiixfhn...threads/crystallization-of-mefedrone-4mmc.72/
Marvin Popcorn Sutton
 
  • Free product samples

    Testing products from new vendors and manufacturers.

    Get free samples for testing now!

  • Always stay in touch with BB forum. Element/Matrix.

    Connect notifications to always stay in touch with the forum!

    Connect

  • The BB Forum team is looking for cooperation:

    • Traffic arbitrage specialists
    • Spammers
    • Advertising agencies
    • Bloggers/Vloggers
    • TOR sites directories
    • Creative people who can create viral content
    • Administrators of Telegram Channels and Groups

      We will pay more for your traffic than our competitors! $0.1 per visitor!!!If you are interested in, write to the administrator.
Top